It can't be rigs problem. I have a GTX970 and run at 4480x1080 quality high. FPS is 20-30. Right now testing quality very high :D
Same result
Same result
Last edited:
Performance issues in 2.4? Just me?
- Thread starter Capt_Baldi
- Start date
-
- Tags
- fps patch 2.4 performance
Shadow Reaper
Space Marshal
Performance issues at 24? It's the age of the little blue pill. You'll be fine. 24 is pretty young but. . .
What?
Oh.
Never mind.
What?
Oh.
Never mind.
If you SLI or xfire try r_MultiGPU = 1 in the console command... could be my paranoia but i swear it helped give me a few more frames...
Xian-Luc Picard
Space Marshal
Yeah, definitely a server side performance issue. CIG has addressed this several times.
Hi, I'm running the following
i7-6600k OC to 4.5ghz
32gb DDR 4 3200 mhz ram
2x GTX 970s SLIed
and so on...
I have a custom config that gets me some decent playable frames 40 - 50 fps. Download the user.txt file, open it up, edit what you need or leave it be, then save it as user.cfg and put it in your C:\Program Files\Cloud Imperium Games\StarCitizen\Public folder.
This is a CUSTOM config for me, read the comments above each option before editing the config. If you get worse frame rates than just delete user.cfg... Also I'm not responsible for breaking your stuff just fyi.
*** NOTE This will override base graphic settings with the settings you input ***
Granted the majority of this FPS loss is server side but this config helps me anyway.
i7-6600k OC to 4.5ghz
32gb DDR 4 3200 mhz ram
2x GTX 970s SLIed
and so on...
I have a custom config that gets me some decent playable frames 40 - 50 fps. Download the user.txt file, open it up, edit what you need or leave it be, then save it as user.cfg and put it in your C:\Program Files\Cloud Imperium Games\StarCitizen\Public folder.
This is a CUSTOM config for me, read the comments above each option before editing the config. If you get worse frame rates than just delete user.cfg... Also I'm not responsible for breaking your stuff just fyi.
*** NOTE This will override base graphic settings with the settings you input ***
Granted the majority of this FPS loss is server side but this config helps me anyway.
Last edited:
You get 40-50fps on Port Olisar or Arena Commander/some other mode?
Also could you test something for me that I've been itching about?
What is your fps if you set sys_physics_GPU to 0. If you get a good boost by using it, I might just stick an old HD6950 in my rig and use that for physics until they implement DX12.
I generally get 40 to 50 FPS in Port Olisar and when I'm flying around in the PU. When I commented out the sys_physics_GPU setting I saw very little difference. I joined the same instance both times testing the sys_physics_GPU setting and both times the frames were around 30 to 40 fps. I believe I had lower then normal frames because there were 3 starfarers sitting on the landing pad outside of the port
And those are *only* Starfarer. I'm wondering what will happen if there are n farers spawning at a Port plus a Javelin enters the room ... not to mention the XXL space battles to which some of the StarCitizens are looking forward to ...
I tried setting the "sys_physics_GPU" to 0 yesterday as well, but no improvement at all.
I fired up my Arena Commander just to see if it was the PU and in AC I'm getting 60 fps constantly, so it's definitely something server side in the PU.
To begin with I thought it had something to do with Port Olisar and the complexibility of the station, but even at some of the Comm Stations where there's not much going on, I see no improvement in terms of framerate at all.
I fired up my Arena Commander just to see if it was the PU and in AC I'm getting 60 fps constantly, so it's definitely something server side in the PU.
To begin with I thought it had something to do with Port Olisar and the complexibility of the station, but even at some of the Comm Stations where there's not much going on, I see no improvement in terms of framerate at all.
Heads up.
I found this just before heading home from work.
I haven't seen it yet, but maybe there's something useful in there. :)
I found this just before heading home from work.
I haven't seen it yet, but maybe there's something useful in there. :)
I did some of the things in the video above, and I used the "Visual Tweaks" only with a few adjustments.
I got around 30 fps when I started in the room and I was like "OMG, It actually WORKED!", but as soon as I got out of the room, it went down to 15-20 fps again..
But! My game is looking pretty nice after the tweaks and it runs just as good with all settings turned off.
I got around 30 fps when I started in the room and I was like "OMG, It actually WORKED!", but as soon as I got out of the room, it went down to 15-20 fps again..
But! My game is looking pretty nice after the tweaks and it runs just as good with all settings turned off.
As I said before, it is server sided performance that needs fixing. If you want to see for yourself, just try running Port Olisar in single player using the level rename hack.
It's better to build a User.cfg file to get rid of useless effects like motion blur and leave your resolution alone.
Haha I know, but I REALLY wanted to do something just to get it running a bit better, but you're right. Nothing can be done really. :P